You are currently viewing SemiWiki as a guest which gives you limited access to the site. To view blog comments and experience other SemiWiki features you must be a registered member. Registration is fast, simple, and absolutely free so please, join our community today!




Results 1 to 1 of 1

Thread: Defect management for EUV without pellicles: extra exposures for wafer inspection

  1. #1
    Expert
    Join Date
    Mar 2012
    Posts
    628
    Thumbs Up
    Received: 228
    Given: 208

    Defect management for EUV without pellicles: extra exposures for wafer inspection

    At this year's International Conference on Extreme Ultraviolet Lithography, in Monterey, California, a Plenary paper was featured by Harry Levinson and Timothy Brunner, titled "Current challenges and opportunities for EUV lithography." It is available as an open access paper: Current challenges and opportunities for EUV lithography

    It nicely lists the main issues that are being addressed today:

    1. Lack of pellicles
    2. Stochastics
    3. 3D mask OPC complications
    4. New resists needed
    5. Aberrations
    6. Scattering (Flare, Out-of-band)
    7. Degrading source efficiency
    8. Uptime/downtime

    In particular, for the lack of pellicles, there is no longer an allowance for dark-field via layers. Instead, it is mentioned that contamination can frequently occur during transport and usage, to the point that procedures are necessary for keeping good yield.

    A flow was provided where specially prepared wafers (separate from product) which use the same reticle but are designed for better defect sensitivity during inspection, are exposed and then inspected for repeating defects.

    If there are no repeating defects, the reticle is considered clean.

    Otherwise, the mask is cleaned, and the exposures and wafer inspections are repeated. The mask cleaning would also be repeated as necessary. In addition, if any product wafers were already exposed by the suspect reticle beforehand, they need to be inspected and possibly reworked.

    Thus, a dirty reticle would need to be exposed in at least three rounds, with the third or final round for product (the first exposure discovers a dirty reticle from repeating defects, and at least a second exposure is needed to confirm it is clean with no repeating defects). This is obviously a significant productivity hit.

    So pellicles continue to be a high priority issue. Also, inspection of pellicles, which also needs to be developed, would help in this area.

    1 Not allowed!
    Last edited by Fred Chen; 2 Weeks Ago at 09:19 PM.
     

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •