You are currently viewing SemiWiki as a guest which gives you limited access to the site. To view blog comments and experience other SemiWiki features you must be a registered member. Registration is fast, simple, and absolutely free so please, join our community today!

  • Moore's Law Drives Foundries and IP Providers

    2017 was a banner year for semiconductor sales as they topped $400B for the first time, an increase of some 20%, there is happiness in Silicon Valley, Taiwan, South Korea, and well, everywhere. With the foundries pushing to ever-smaller process dimensions and even going back to mature nodes and offering more variations that are more power or area efficient, I am noticing a proliferation of process nodes to choose from. The big challenge that crops up is how to get all of that much-needed semiconductor IP onto the latest process node in order to attract new customer design starts. I've been following one semiconductor IP provider in the UK called Moortec that has embedded in-chip monitoring blocks that allow chip engineers to dynamically monitor the Process, Voltage and Temperature (PVT). What's new this week is their announcement that the TSMC 12nm FinFET process called 12FFC is now supported by their PVT monitoring IP.

    Article: Cadence 3D Methodology-moortec-min.jpg

    The 12FFC process from TSMC has a new six-track (6T) standard cell library, compared to the 16FFC node that used 9T and 7.5T. So going from the 16FFC to 12FFC process you would expect an area decrease up to 18% and about 5% faster speeds. Nominal supply voltage level can go down to 0.5V.

    Related blog - Top 10 Updates from the TSMC Technology Symposium, Part II

    Article: Cadence 3D Methodology-tsmc12ffc-min.jpg
    TSMC 12FFC photograph. Source: TSMC

    Related blog - Embedded In-chip Monitoring, Webinar Recap

    So why do you need in-chip monitoring?

    Here's seven good reasons to consider using in-chip monitoring:

    • Optimize SoC performance
    • Detect process variations per chip
    • Enable Dynamic Frequency and Voltage Scaling (DVFS) to optimize power
    • Gate delay measurements
    • Critical path analysis
    • Dynamic voltage analysis
    • Monitor aging effects of the FinFET transistors


    OK, you like the concept of PVT monitoring and see the benefits, but how do you communicate with this IP?

    Moortec IP uses AMBA APB interfacing and you can even have multiple instances of monitor IP on the same chip, then you connect with a test access port.

    Read the latest press release from Moortec here.