WP_Term Object
(
    [term_id] => 159
    [name] => Siemens EDA
    [slug] => siemens-eda
    [term_group] => 0
    [term_taxonomy_id] => 159
    [taxonomy] => category
    [description] => 
    [parent] => 157
    [count] => 716
    [filter] => raw
    [cat_ID] => 159
    [category_count] => 716
    [category_description] => 
    [cat_name] => Siemens EDA
    [category_nicename] => siemens-eda
    [category_parent] => 157
)
            
Q2FY24TessentAI 800X100
WP_Term Object
(
    [term_id] => 159
    [name] => Siemens EDA
    [slug] => siemens-eda
    [term_group] => 0
    [term_taxonomy_id] => 159
    [taxonomy] => category
    [description] => 
    [parent] => 157
    [count] => 716
    [filter] => raw
    [cat_ID] => 159
    [category_count] => 716
    [category_description] => 
    [cat_name] => Siemens EDA
    [category_nicename] => siemens-eda
    [category_parent] => 157
)

August 11th – Hands-on Workshop with Calibre: DRC, LVS, DFM, xRC, ERC

August 11th – Hands-on Workshop with Calibre: DRC, LVS, DFM, xRC, ERC
by Daniel Payne on 08-06-2011 at 9:29 pm

I’ve blogged about the Calibre family of IC design tools before:

Smart Fill replaced Dummy Fill Approach in a DFM Flow
DRC Wiki
Graphical DRC vs Text-based DRC
Getting Real time Calibre DRC Results with Custom IC Editing
Transistor-level Electrical Rule Checking
Who Needs a 3D Field Solver for IC Design?
Prevention is Better than Cure: DRC/DFM Inside of P&R
Getting to the 32nm/28nm Common Platform node with Mentor IC Tools

If you want some hands-on time with the Calibre tools then consider attending the August 11th workshop in Irvine, CA.

Share this post via:

Comments

There are no comments yet.

You must register or log in to view/post comments.