[A typical SoC configuration]
In the above SoC configuration there are ARM CoreLink advanced System IP components connected to Cadence Databahn DDR controller. These advanced System IP components provide many choices to designers for interconnection along with other important solutions such as cache coherency, thus enabling them to rapidly explore the design space and determine the best optimized configuration.
Cadence and ARM have developed an efficient solution for SoC integration where ARMís highly configurable IP components are used in Cadenceís Interconnect Workbench environment. ARMís CoreLink NIC-400 can have many master and slave interfaces of AMBA family, i.e. AHB, AXI, APB and AXI4 which again can have configurable address space, width and clock speeds. Then there are Quality of Service (QOS) and Virtual Networks (QVN) which provide mechanisms for bandwidth and latency management. To manage routing congestion, there are Thin Links at user disposal for any special point-to-point connection.
[AMBA Designer Ė Configuration of a complex NIC-400 interconnect]
ARM provides a CoreLink AMBA Designer for user to easily and interactively select implementation options for the best configuration. A design topology having appropriate size and switch matrix with sufficient throughput and low latency must be selected from the rest.
After quickly architecting the SoC, the immediate challenge is to verify how this complex arrangement is going to perform under different scenarios of a full SoC context. This is where Cadence Interconnect Workbench comes into picture and provides many different types of ďwhat if?Ē analysis capabilities.
[Top - Latency distribution, Bottom - One-click waveform debug of slow transactions]
Above is an example of latency distribution of a group of simulations. It clearly shows that writes are quicker than reads. Slower transactions can be debugged further by right-clicking and launching Cadenceís SimVision tool.
Interconnect Workbench provides comprehensive capabilities for quickly capturing and analysing cycle-accurate performance of the architecture. AMBA Designer generates the RTL as well as IP-XACT XML file that matches the design. Interconnect Workbench reads the IP-XACT file and automatically generates a UVM testbench in either Ďeí or ĎSystemVerilogí.
[Interconnect Workbench generated testbench]
The IP-XACT descriptions of System IP cores enables Interconnect Workbench to provide performance analysis for interconnect components as well as cycle-accurate models of DDR controllers. Above figure shows the testbench of a SoC core along with DDR controller.
Itís imperative that with flexible tools to select appropriate architectures, clock schemes, memory and cache sizes, power domains and other required configurations, semiconductor design integrations can be accelerated to meet the time-to-market challenge. A detailed description of ARMís CoreLink, AMBA Designer and Cadenceís Interconnect Workbench is provided in a whitepaper at Cadence website. Itís an interesting read to know more about recent advances in System IP components and interconnect performance optimization in SoCs.
More Articles by Pawan Fangaria.....
lang: en_US </script> <script type="IN/Share" data-counter="right"></script>